¡Oferta!

Analizador de espectro R&S®FPL1007-P6

23.930,00  20.340,00  (IVA Excl.)

  • Analizador de espectro R&S®FPL1007
  • Rango de frecuencias: 5 kHz a 7,5 GHz
  • Generador de señal interno
  • Preamplificador interno
  • Atenuador de paso de 1 dB
  • Análisis de modulación analógica
  • Aplicación de medición EMI

Disponible para reserva

Analizador de espectro Rohde & Schwarz FPL1007 con rango de frecuencia de 5 kHz a 7,5 GHz.

Incluido en el paquete:

  • Analizador de espectro R&S®FPL1007 de 5kHz a 7,5 GHz
  • R&S®FPL1B4 Referencia de frecuencia de OCXO
  • R&S®FPL1B5 Interfaces adicionales de
  • R&S®FPL1B9 Generador interno
  • R&S®FPL1B10 INTERFAZ GPIB
  • R&S®FPL1B22 PREAMPLIFICADOR RF
  • R&S®FPL1B25 atenuador de paso de 1 dB
  • R&S®FPL1K7 Análisis de modulación analógica
  • R&S®FPL1K54 Aplicación de medición EMI
FPL1000 Specifications
Frequency
Frequency rangeR&S®FPL10035 kHz to 3 GHz
R&S®FPL10075 kHz to 7.5 GHz
Frequency resolution0.01 Hz
Bandwidth
Resolution bandwidth (–3 dB)sweep filters100 kHz to 10 MHz in 1/2/3/5 sequence
FFT filters1 Hz to 50 kHz in 1/2/3/5 sequence
Signal analysis bandwidth (equalized)standardnom. 10 MHz
with R&S®FPL1-B40 optionnom. 40 MHz
Displayed average noise level (DANL)
RF preamplifier off5 kHz ≤ f < 100 kHztyp. –143 dBm
100 kHz ≤ f < 5 MHz< –140 dBm, typ. –143 dBm
5 MHz ≤ f < 3 GHz< –149 dBm, typ. –152 dBm.
3 GHz ≤ f < 5 GHz< –143 dBm, typ. –146 dBm
5 GHz ≤ f ≤ 7.5 GHz< –140 dBm, typ. –143 dBm
RF preamplifier on (gain nom. 20 dB)3 MHz ≤ f < 10 MHz< –155 dBm, typ. –158 dBm
10 MHz ≤ f < 2 GHz< –163 dBm, typ. –166 dBm
2 GHz ≤ f < 3 GHz< –162 dBm, typ. –165 dBm
3 GHz ≤ f < 5 GHz< –158 dBm, typ. –161 dBm
5 GHz ≤ f < 7 GHz< –156 dBm, typ. –159 dBm
7 GHz ≤ f < 7.5 GHz< –155 dBm, typ. –158 dBm
Attenuation and Gain
Setting range of attenuatorstandard0 dB to 45 dB, in 5 dB steps
with R&S®FPL1-B25 option0 dB to 45 dB, in 1 dB steps
PRF preamplifier gainwith R&S®FPL1-B22 optionnom. 20 dB
Intermodulation
1 dB compression of input mixer (two-tone)RF attenuation 0 dB, RF preamplifier = offnom. +7 dBm
Third-order intercept point (TOI)RF attenuation 0 dB, level 2 × –20 dBm,
∆f > 5 × RBW or 10 kHz, whichever is larger,
RF preamplifier = off
10 MHz ≤ fin < 300 MHz> 13 dBm, typ. 16 dBm
300 MHz ≤ fin < 3 GHz> 17 dBm, typ. 20 dBm
3 GHz ≤ fin ≤ 7.5 GHz> 15 dBm, typ. 18 dBm
with R&S®FPL1-B22 option,
RF attenuation 0 dB, level 2 × –40 dBm,
∆f > 5 × RBW or 10 kHz, whichever is larger,
RF preamplifier = on
5 MHz ≤ fin < 7,5 GHznom. 0 dBm
Phase noise
SSB phase noisefrequency = 1000 MHz, carrier offset
100 Hznom. –88 dBc (1 Hz)
1 kHz< –99 dBc (1 Hz)
10 kHz< –105 dBc (1 Hz), typ. –108 dBc (1 Hz)
100 kHz< –110 dBc (1 Hz), typ. –115 dBc (1 Hz)
1 MHz< –130 dBc (1 Hz), typ. –135 dBc (1 Hz)
10 MHznom. –152 dBc (1 Hz)
Overall Amplitude Accuracy
Total measurement uncertaintysignal level 0 dB to –50 dB
below reference level, S/N > 20 dB,
sweep time auto, sweep type = FFT,
RF attenuation 10 dB, 20 dB,
30 dB, 40 dB, RF preamplifier = off,
span/RBW < 100, confidence level 95 %,
+20 °C to +30 °C
0.5 dB
1 MHz ≤ f < 3 GHz0.5 dB
3 GHz ≤ f < 7.5 GHz0.8 dB

Información adicional

Marca