Tecnología de próxima generación
La serie R&S®MXO 4 es la primera de una nueva generación de osciloscopios que destaca por su rendimiento y valor. Los instrumentos ofrecen un avance de ingeniería único en su género para una visión sin igual.
Tienen la velocidad de actualización en tiempo real más rápida del mundo, de 4,5 millones de formas de onda/s, lo que significa que los ingenieros pueden ver más eventos infrecuentes que con cualquier otro instrumento. Con su ADC de 12 bits, la serie R&S®MXO 4 tiene una resolución 16 veces superior a la de los osciloscopios tradicionales de 8 bits en todas las frecuencias de muestreo, sin ningún tipo de compromiso para obtener mediciones más precisas. Con una memoria de adquisición estándar de 400 Mpts en los cuatro canales y una opcional de 800 Mpts intercalada, el instrumento tiene hasta 100 veces la memoria estándar de instrumentos comparables.
Los osciloscopios de la serie R&S®MXO 4, que están por encima de otros instrumentos similares, cuentan con una impresionante pantalla táctil Full HD de 13,3″ y una interfaz de usuario intuitiva con una curva de aprendizaje de menos de 15 minutos.
Especificaciones técnicas
| Vertical system | ||
| Analog channels | 4 | |
| Digital channels (opt.) | 16 | |
| Analog bandwidth (–3 dB) | R&S®MXO 4 with (R&S®MXO 4 -B24x options) | 200 MHz, 350 MHz, 500 MHz, 1 GHz, 1.5 GHz |
| Rise time | R&S®MXO 4 (with R&S®MXO 4 -B24x options) | 1.75 ns, 1 ns, 700 ps, 350 ps, 234 ps |
| Input impedance | 50 Ω ± 1.5 %, 1 MΩ ± 1 % || 12 pF (meas.) | |
| Input sensitivity | at 50 Ω | 0.5 mV/div to 1 V/div, entire analog bandwidth supported for all input sensitivities |
| at 1 MΩ | 0.5 mV/div to 10 V/div, entire analog bandwidth supported for all input sensitivities | |
| Vertical resolution | up to 18 bit with HD mode (high definition) | |
| DC gain accuracy | offset and position set to 0 V, after self-alignment | |
| input sensitivity > 5 mV/div | ±1 % full scale | |
| input sensitivity ≤ 5 mV/div to ≥ 1 mV/div | ±1.5 % full scale | |
| input sensitivity < 1 mV/div | ±2.5 % full scale | |
| Acquisition system | ||
| Sampling rate | analog channels (real time) | max. 5 Gsample/s on 2 channels, max. 2.5 Gsample/s on 4 channels |
| analog channels (interpolated) | max. 5 Tsample/s | |
| digital channels | max. 5 Gsample/s on each channel | |
| Acquisition memory | standard | 400 Mpoints with 4 active channel (single), 400 Mpoints with 2 active channel (run) |
| R&S®MXO4-B108 option | 800 Mpoints with 2 active channel (single), 800 Mpoints with 1 active channel (run) | |
| Max. acquisition rate | > 4 500 000 waveforms/s | |
| Acquisition modes | sample, peak detect, average, envelope | |
| Interpolation modes | linear, sin(x)/x, sample & hold | |
| Horizontal system | ||
| Timebase range | Selectable between 200 ps/div and 10 000 s/div | |
| Timebase accuracy | after delivery/calibration, at +23 °C | ±0.2 ppm |
| During calibration interval | ±1 ppm | |
| Channel-to-channel skew | between analog channels | < 100 ps (meas.) |
| between digital channels | < 500 ps (meas.) | |
| Trigger system | ||
| Standard trigger types | Edge, glitch, width, runt, window, timeout, interval, slew rate, setup&hold, pattern, state | |
| Advanced trigger modes | A/B/R, serial bus, trigger in and out | |
| Trigger sensitivity | 0.0001 div, from DC to instrument bandwidth for all vertical scales | |
| Analysis and measurement | ||
| Automatic measurements | 39 | |
| Cursor measurements | 4 | |
| Waveform mathematics | Up to 5 equations math on math (add, subtract, multiply, divide, absolute value, square, square root, integrate, differentiate, log10, loge, log2, reciprocal, invert, low pass, high pass, rescale (a*x+b)) | |
| Logic analyzer (MSO) functionality | ||
| Digital input channels | 16 | |
| MSO Bandwidth | 400 MHz | |
| MSO sampling rate | 5 Gsamples/s per channel | |
| General data | ||
| Dimensions | W × H × D | 414 mm × 279 mm × 162 mm (16.3 in × 10.99 in × 6.38 in) |
| Weight | without options, nominal | 6.0 kg (13.23 lb) |
| Interfaces | 1 x USB 3.0 super speed port 2 x USB 2.0 high speed port 2 x USB 3.1 gen1 ports 1 x USB 3.1 gen1, type B plug 1 Gbps LAN HDMI for external monitor External trigger, trigger output Ref In, ref out VESA mount | |
| Display | type | 13.3″ LC TFT color display with capacitive touchscreen |
